I have a Grace machine quilting frame, a Hinterburger hand quilting frame and a mini long arm. I have used these in different combinations with no real success.
Based on a great tutorial posted by a generous and creative woman (I can no longer find the link) I came up with this little quilting surface.
It is made of a sheet of insulation cut and built up to be flush with the surface of my machine. I needed to use a piece of balsa wood to make up the difference in measurement. I then cut a piece of vinyl to top it off to make it slippery and hold it together. (if you want more specific info drop me an email) This surface worked great for small projects. I use it on the dining room table and it lifts off and on with ease. It doesn't take up a lot of room and it cost me under $10.
It seemed my solution had been found. Now I happen to be quilting a larger quilt and am having trouble. Instead of just shooshing across the surface it catches on the lip of the surface and stalls. Not good. More brain storming, and then Epiphany!
Can you guess my idea? Post to follow!!
Great quilt table idea. Thx for sharing.
ReplyDeleteHere you go:
ReplyDeletehttp://www.crazyshortcutquilts.com/2008/01/09/cheap-sewing-and-quilting-table/